Microbus Uncomitted backplane PCB designed for use with Microprocessors in 4 designs. Designed for minimal crosstalk and high perfomance. Can be supplied assembled with connectors in either solder or pressfit technology.
20 in stock
21 Slot Microbus Backplane 64/96 connectors – PTH Eurocard backplanes designed for use with microprocessors, Reliability of plated through holes, Minimal cross talk, DIN 41612 connectors, DIN 41494 card frame compatible, Choice of connector styles and pitches: 3HP(15.24mm) for PCB’s for hard wired daughter boards, 4HP(20.32mm) for two level wirewrap daughter boards. A low cost version of the Microbus backplane still with the reliability of plated through holes but with restricted in use to only 64/96 way connectors. The basic design is very simple, with pin 2 and 31 on rows A and C are committed to Vcc, This leaves 56 separate signal lines from lines from pin 3 A and C to pin 28 A and C inclusive. Tests have been carried out on the 84Hp version by feeding a 1MHz square wave signal (5ns rise and fall times) through a DIN 41612 connector and measuring the adjacent tracks at the opposite end. Note: The micro bus motherboard was not terminated, which would have reduced the amplitude to the cross talk and changed its shape considerably.
Price per pack of:
1
Length:
128.6mm
Width:
426mm
Max Length:
426.3mm
Max Width:
130mm
Features:
Connected to voltage planes
No. of Layers:
PTH
No. of Slots:
28
Pitch of Slot:
4 HP (20.32 mm)
Connector Body:
64/96
| from 4 pcs. | from 6 pcs. | from 11 pcs. | from 16 pcs. |
|---|---|---|---|
| £167.50 + VAT | £158.69 + VAT | £149.87 + VAT | £141.05 + VAT |
