When a project needs more protection than plastic can give — heat, knocks, screening or a premium feel — an extruded aluminium enclosure is the answer. Vero’s aluminium extrusion enclosures are cut, anodised and finished in the UK, with slide-in PCB channels that make assembly a two-minute job.
Why choose an aluminium extrusion enclosure?
- Slide-in PCB channels — boards up to 100 mm wide locate directly in the extrusion, no fixings needed.
- Natural EMC screening — the all-metal shell shields sensitive circuits without extra coatings.
- Heat dissipation — aluminium draws heat away from power electronics far better than ABS.
- IP-rated sealing — optional gasket kits seal the end panels against dust and moisture.
- A metal electronic enclosure that looks the part — clean anodised finish, ready for printing or engraving.
The range
- 81 × 40 series — compact extruded aluminium project box for sensors and interfaces — 125, 165 and 200 mm lengths.
- 105 × 60 series — the most popular aluminium project box size, from 100 mm to 285 mm, with plain or side-access versions.
- Accessories — wall-mounting kits, desk feet and IP gaskets to complete the enclosure.
- Full aluminium category — every extruded aluminium enclosure in stock, with prices and drawings.
Custom-machined to your drawing
Our modification service mills apertures, drills connector holes and prints legends on any extruded aluminium enclosure in the range — so your aluminium project box arrives ready for the production line. Small batches welcome, with a certificate of conformance on request.
Choosing the right extruded aluminium enclosure size
Start from the PCB. The 81 × 40 mm extrusion takes boards up to 75 mm wide and the 105 × 60 mm extrusion takes boards up to 100 mm wide; in both, the board slides into the internal channels so no standoffs or fixings are needed. Then pick the length — allow roughly 4 mm less than the case length for the PCB itself:
- 81 × 40 mm — 125, 165 or 200 mm long (Part Nos. 14-0002, 14-0003, 14-0004).
- 105 × 60 mm — 100, 125, 165, 200, 225 or 285 mm long (Part Nos. 14-1001 to 14-1006), also available with a removable side panel for access to the board (14-2001 to 14-2006).
- Finish it off — add the wall-mounting kit (14-3001), the desktop foot kit (14-3003) or the IP gasket (14-3004) to suit the installation.
Extruded aluminium enclosure FAQs
Are extruded aluminium enclosures EMC screened?
Yes — the continuous metal shell gives natural screening without a conductive coating, which is why an aluminium extrusion enclosure is often chosen over a plastic case for sensitive or noisy electronics. Plastic cases can be screened instead with our EMC coating service.
Can an extruded aluminum enclosure be wall mounted?
Yes. The 14-3001 wall-mounting kit fits the extrusion, and the 14-3003 foot kit converts the same case for desktop use.
Can you cut, drill or print the enclosure for me?
Yes — connector cut-outs, vents, printing and engraving are all done in-house through our enclosure modification service, so the aluminium project box arrives ready to fit.
Browse aluminium enclosures in stock
Showing the single result
-
Aluminium Enclosure 100mm wide IP rating Gasket Part No. 14-3004
$2.64 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x100 Part No. 14-1001
$26.76 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x125 Part No. 14-1002
$28.59 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x165 Part No. 14-1003
$32.12 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x200 Part No. 14-1004
$33.95 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x225 Part No. 14-1005
$36.95 (Ex VAT) Add to basket -
Aluminium Enclosure Size 105x60x285 Part No. 14-1006
$91.84 (Ex VAT) Add to basket -
Aluminium Enclosure Size 81x40x125 Part No. 14-0002
$22.37 (Ex VAT) Add to basket -
Aluminium Enclosure Size 81x40x165 Part No. 14-0003
$24.27 (Ex VAT) Add to basket -
Aluminium Enclosure Size 81x40x200 Part No. 14-0004
$25.81 (Ex VAT) Add to basket -
Aluminium Enclosure Universal Desk Top Foot Kit Part No. 14-3003
$4.44 (Ex VAT) Add to basket -
Aluminium Enclosure with side access Size 105x60x100 Part No. 14-2001
$53.64 (Ex VAT) Add to basket
Prefer a lighter, lower-cost housing? See our plastic project boxes.
Get the right size first time. Call 01489 776931 or email sales@verotl.com with your PCB dimensions — we’ll confirm the extrusion that fits.










